酒店标识牌创意设计，其它种类的酒店标牌

酒店标识牌创意设计，其它种类的酒店标牌

    在我们生活里，酒店的标识牌设计，即人们常把把产品的酒店标牌比喻成是“产品的窗口”。这是一家酒店的招牌门面，在这里是需要完完整整的设计了，这形象地说明了用户能通过酒店标牌了解产品的相关信息，说明了它的重要性。我们一到酒店里，第一就是找酒店的标识牌，了解酒店功能区，在机械制造中各种规格的产品酒店标牌那是不可缺少的。

    那这些酒店的标识牌制作有那些要求呢，我们在制作时有那些不一样的创意和结构呢？产品酒店标牌制作工艺一直到蚀刻为止，都与前面完全一样。

    酒店的一制作过程，上色工艺说起。产品酒店标牌上色一般采用的是电泳上色工艺，酒店标识牌创意设计上色机所使用的是带色的阴极电泳涂料。我们这次用的是黑色。这是基本的一进程开始。

    我们在酒店标识牌制作上色前，我们力求把这些创意分解开来，将负极接在导电的极板上，正极接在酒店标牌半成品中间保护膜缺口处，要保证酒店标牌半成品导电正常。把这些酒店的标识牌制作成基本的结构后，然后用手提着导电夹的绝縁处，把酒店标牌半成品放在黑色的阴极电泳涂料中，打开电源通电，将时间设定为40秒，时间到后,上色机会自动断电,酒店标牌的色就上好了。用水将多余的浮色冲洗干净后,放入烘箱,温度设置为88度,加热20分钟，固化漆膜。这些都是酒店的基本流程，我们在这些创意里面，要力求把这些做到第一点。

    然而，酒店标识牌需要如何上色呢，我们的酒店标识牌就是这样制造出来的结果，在干净的容器里加入固体氢氧化钠，把上好色的酒店标牌放在上面里，再按1：10的比例加入80度左右的热水，这个就是一些酒店的标识牌师会过来的。设计的过程需要跟制作相结合，摆动容器，在氢氧化钠固体充分溶解的同时，酒店标牌半成品蚀刻后留下来的感光膜也就慢慢地被腐蚀下去了。摆动半分钟后,取出酒店标牌，用水洗净残留在表面的腐蚀液。这就是制作的一个基本过程。

    在这些的最后，总之，酒店标牌的制作手法是多式多样、多姿多彩的，我们要把这些做好，是需要花很多的功能和精力的，只要能多动脑，多实践，我们相信，酒店标牌制造业也能使我们的明天更美好。我们人和时代的标识牌制作也是非常的完美的。

Hotel signage creative design, and other types of hotel signs

    We live in the hotel's signage design, that people often likened to the product label hotel is "the product window." This is a hotel facade signs, here is the need for a full account of the design, which vividly illustrates the user through the hotel signs to understand product information, indicating its importance. We got to the hotel, the first is to find the hotel signage, about the hotel functional areas, in all kinds of machinery products in the hotel sign that is indispensable.

    That these hotels have made the identification cards that require it, we are not the same as those produced when the creativity and structure? Product Hotel signs up the production process until the etching, are exactly the same as before.

    Production process of a hotel, talking about the color process. Product Hotel sign is commonly used electrophoresis color color process, color machine is used with a color cathode electrophoretic coating. This time, we are black. This is the basic beginning of a process.

    We produce color signage in the hotel, we strive to break down these ideas will be negative pole connected to the conductive plate, cathode connected to the hotel signs protective film gap in the middle of semi-finished products, semi-conductive plate to ensure the normal hotel. Identity cards of these hotels into the basic structure of production, then the folder with the hand and never Yuan Department conductive, semi-finished products to the hotel sign on the cathodic electrodeposition coating of black, open the power supply power, the time set to 40 seconds, the time to, the color will automatically power off, the color on the hotel sign Shanghao. Excess water rinse after floating, into the oven, the temperature set to 88 degrees, 20 min, cured film. These are the hotel's basic processes, which in these ideas, we must strive to achieve the first of these points.

    However, the hotel signage need to color it, our hotel signage is the result of such manufactured in a clean container by adding solid sodium hydroxide, to the lust of the hotel sign on top, the press 1:10 The proportion of added 80 degrees of hot water, this is some of the hotel's signage will be over division. With the production design process requires the combination of swing containers full of solid sodium hydroxide dissolved in the same time, the hotel signs to the left semi-finished etching the photosensitive film will go on slowly corrode. Swing after half a minute, remove the hotel signs, washed with water on the surface of the etching solution residue. This is a basic production process.

    In these last, in short, the hotel is a sign of multi-type production methods varied, colorful, and we want them to do, is the need to spend a lot of functions and energy, as long as more brains, more practice, we believe, Hotel sign manufacturing industry enable us to better tomorrow. We create brand identity and age is very perfect.