上海处理酒店标识牌不锈钢板表面的工艺分享！

处理酒店标识牌不锈钢板表面的工艺分享！

    酒店标识牌的吹干工作有一些什么技巧呢，如用吹干，用吹风机把清洗好的不锈钢板表面残留的水滴吹干，不要留下水渍。这些就是防止这些做好的标识牌不易被破坏，造成养化。
    一些酒店的标识牌的花纹是需要蚀刻的，那是如何制作的原理呢？不锈钢板酒店标牌的制作,主要采用蚀刻的工艺来完成。它的蚀刻原理是：

    这里要注意的是酒店标识牌系统制作时的材料和厚度，这个代表不锈钢板的厚度，我们先在它的表面均匀的涂上一层耐腐蚀的感光油墨，在上面放上一张菲林底片，用紫外光进行曝光，穿过菲林底片上透明部分的紫外光会与感光油墨起化学反应，形成抗弱碱性的凃层，菲林底片黑色部分下面的感光油墨则不耐弱碱。通过这些处理好，拿去菲林底片，把不锈钢板泡在弱碱性的碳酸钠溶液中，不耐弱碱部分的凃层就会与碳酸钠溶液起化学反应而脱落，这些地方的金属就裸露出来了，不锈钢板上就会呈现出图案。这就是我们平时看到的一些非常漂亮的酒店图案，都可以做在酒店的标识牌上，这样形成了酒店的统一风格化，在它的反面贴上一层防腐保护膜，把它放入蚀刻机里，用三氯化铁溶液冲刷暴露着的不锈钢板表面，三氯化铁溶液中的三价铁离子会快速氧化、蚀刻这部分不锈钢板，我们用微距拍摄可以清晰地看到，上海处理酒店标识牌局部的不锈钢板被蚀刻下去了，在有些制作时可以多次进行，让其产生不同的效果，这样的酒店形象标识牌还需要注意表面的光，不要花了，这样就不精致了。

Hotel signage stainless steel plate processing surface of the craft to share!

     The dry hotel signage what skills do some work, such as with dry with a hair dryer to clean the surface of stainless steel a good residual water droplets dry, do not leave water spots. These identity cards to prevent these do not easily damaged, resulting in eutrophication.
     Some hotel signage etched pattern is needed, it is how to make the principle of it? Hotel stainless steel plate production, mainly to complete the etching process. It's etched principle is:

     Here we must note that when the hotel signage systems to produce the material and thickness, which represents the thickness of steel plate, we first of its surface evenly coated with a layer of corrosion-resistant light-sensitive ink, put a film in the above film, for UV exposure, through film on the transparent part of the film with UV light-sensitive ink from a chemical reaction, the formation of alkaline resistant coating, film negatives black ink is light-sensitive part of the following impatience weak base. These deal with, take film negatives, the stainless steel plate soaked in alkaline sodium carbonate solution, intolerance weak base part of the coating will react with sodium carbonate solution and off, where the bare metal on the out, stainless steel plate will be showing a pattern. This is what we usually see some very nice hotels patterns, can be done in the hotel's logo on the card, creating a uniform style of the hotel, in its negative paste layer anti-corrosion protective film, put it into the etching machine, the use of ferric chloride solution, washed with stainless steel plate exposed to the surface of ferric chloride solution in the ferric ion rapidly oxidized, etched stainless steel this part, we can clearly see the macro, local stainless steel plate was etched down, and in some production can be repeated, let it produce different results, this image of the hotel signage also need to pay attention to the surface of the light, not spent, so as not to fine the.